Electrics aluminum plate
Our aluminum plate products can help electrics and appliances industries to meet the requirements of different electrical products worldwide, and help them occupy the competitive position in the market.
Aluminum plate has superb processability and electrical conductivity, and it is excellent heat radiating materials. Signi aluminum is capable of providing the industries with various profiles, which is suitable for large-power substation device, stabilize voltage supply, communication power supply, clean power supply, radio and television transmission device and inverter, according to their requirements.
Classic alloy: 2024, 5052, 5754, 5056, 5383, 6005A, 6082, 6061, 7075 .
Product character: high strength, excellent machining performance, good heat radiation.
Product character: Superior corrosion resistance, good weldability, high fatigue resistance.
|
Specifications (Aluminum plate) |
|
Alloys (AA) |
Temper |
Thickness range (mm) |
Length range (mm) |
Width range (mm) |
2024, 5052, 5754, 5056, 5383, 6005A, 6082, 6061, 7075
|
F and O
H111, H112, T4, T6 (For 6061, 6063), T651(Stretched plate) |
6 — 300 |
1000 — 10000 |
500 — 2700 |
|
Stretched aluminum plate |
|
Thickness limit |
6 — 70 mm |
|
Length limit |
2000 — 10000 mm |
|
Chemical composition |
|
Alloy (%) |
2024 |
5052 |
5754 |
5056 |
6061 |
7075 |
|
Si |
0.50 |
0.25 |
0.40 |
0.30 |
0.40— 0.80 |
0.40 |
|
Fe |
0.50 |
0.40 |
0.40 |
0.40 |
0.70 |
0.50 |
|
Cu |
3.8~4.9 |
0.10 |
0.10 |
0.10 |
0.15— 0.40 |
1.2— 2.0 |
|
Mn |
0.30~0.9 |
0.10 |
0.50 |
0.05~0.20 |
0.15 |
0.30 |
|
Mg |
1.2~1.8 |
2.2— 2.8 |
2.6— 3.6 |
4.5~5.5 |
0.8— 1.2 |
2.1— 2.9 |
|
Cr |
0.10 |
0.15— 0.35 |
0.30 |
0.05~0.20 |
0.04— 0.35 |
0.18— 0.28 |
|
Zr |
— |
— |
— |
— |
— |
— |
|
Zn |
0.25 |
0.10 |
0.20 |
0.10 |
0.25 |
5.1— 6.1 |
|
Ti |
0.15 |
— |
0.15 |
— |
0.15 |
0.20 |
|
Each (Others) |
0.05 |
0.05 |
0.05 |
0.05 |
0.05 |
0.05 |
|
Total (Others) |
0.15 |
0.15 |
0.15 |
0.15 |
0.15 |
0.15 |
|
Al |
Remaining |
Remaining |
Remaining |
Remaining |
Remaining |
Remaining |
|
Single number indicates maximum content. |
|
Packing |
|
Aluminum Plate : Aluminum Plates are placed in wooden boxes on wooden skids with runners along the length of the sheet. They are wrapped in HDPE with hardboard on top and bottom of the stack. Hoop iron strapping runs along the length of the sheets. Silica gel packets are put in the boxes for moisture protection.(Aluminum plate) |
